Saturday, September 2nd 2006

 

11:00-13:30 : Registration

 

 

13:30-14:10 : OPENING CEREMONY (Athina1 Room)

 

 

 

 

 

 

 

14:10 - 15:10 : Keynote presentation on recent advances on power transformers

 

 

15:10-15:30 Coffee Break

 

15:30-16:40 POSTER (DIALOGUE) SESSION PSA1: PERMANENT MAGNET MACHINES

Saturday, September 2nd 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PSA1-1

141

A Permanent Magnet Generator for Small Scale Wind Turbines

J.R. Bumby, N. Stannard and R. Martin

UK

PSA1-2

313

A Method for Dynamic Analysis of an Interior Permanent Magnet Motor Based on Nonlinear Magnetic Circuit

K. Nakamura, M. Ishihara, and O. Ichinokura

Japan

PSA1-3

163

High-speed permanent magnet generators design and testing

Yanush Danilevich, Victor Antipov

Russia

PSA1-4

180

An Attempt to Extend the Flux Weakening Range of a Single Stator Dual Rotor PM Machine

Imen Abdennadher, Ahmed Masmoudi and Ahmed Elantably

Tunisia

PSA1-5

234

Numerical design of DC brush motor with rare-earth magnets for ABS system including tolerances of input parameters

G. Ombach, J. Junak and A. Ackva

Germany

PSA1-6

244

A Stator Turn Fault Tolerant Strategy for Interior PM Synchronous Motor Drives in Safety Critical Applications

Youngkook Lee and T.G. Habetler

USA

PSA1-7

245

Comparative Evaluation of Axial Flux versus Radial Flux Permanent Magnet Synchronous Machines

M. Krishnamurthy, B. Fahimi and K. D. Oglesby

USA

PSA1-8

249

Design and Implementation of a Tubular Brushless DC Motor for Direct-Drive Applications

S.H. Mao, B.J. Lin, and M.C. Tsai

Taiwan

PSA1-9

250

Design of Interior Permanent Magnet Motors for Smoothening Back-EMF Waveform

H.S. Chen and M.C. Tsai

Taiwan

PSA1-10

251

Development of the Discontinuous Primary Permanent Magnet Linear Synchronous Motor

Kenji Suzuki, Yong-Jae Kim, Masaya Watada and Hideo Dohmeki

Japan

PSA1-11

254

Optimised design of concentrated winding PM brushless motors

A. Castagnini, P. Faure Ragani, G. Secondo

Italy

PSA1-12

266

Evaluation of Eddy Current Loss in Tubular Permanent Magnet Motors by Three-Dimensional Finite Element Analysis

J. Chai, J. Wang and D. Howe

UK

PSA1-13

267

Magnetic Field Distribution in Brushless Permanent Magnet AC Motors with Interior Permanent Magnets (IPM) and Slotted Stator

F. Poltschak, W.Amrhein

Austria

PSA1-14

274

A Brushless Permanent Magnet Motor with Hybrid Windings

M. C. Tsai and L. Y. Hsu

Taiwan

PSA1-15

276

Torque ripple reduction design of Multi-layer Interior Permanent Magnet Synchronour Motor by using Response Surface Methodology

Liang Fang, Soon-O Kwon, Peng Zhang, Jung-Pyo Hong

China

PSA1-16

311

Reluctance Network Analysis Model of a Permanent Magnet Generator Considering an Overhang Structure

K. Nakamura, M. Ishihara, and O. Ichinokura

Japan

PSA1-17

312

Multipolar Reluctance Generator Using Stator Core with Permanent Magnet

O. Ichinokura, T. Ono, T. Tashiro, K. Nakamura, and A. Takahashi

Japan

PSA1-18 346

Distribution, coil-span and winding factors for AFPM with concentrated windings

S. E. Skaar, Ø. Krøvel, R. Nilssen

Norway

PSA1-20

284

Application of a Toroidal Harmonic Expansion for Computing the Magnetic Field from a Balanced 6-Pole Permanent-Magnet Motor

J. Selvaggi, S. Salon, O. Kwon, and M.V.K. Chari

USA

 


15:30-16:40 POSTER (DIALOGUE) SESSION PSA2: SYNCHRONOUS MACHINES

Saturday, September 2nd 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PSA2-1

135

New Approach to Identification of Turbogenerator Rotor Quantities

G. Rogozin, N. Pjatlina

Ukraine

PSA2-2

188

About Currents from the Damping Winding Bars of Three-phase Synchronous Generator Connected on Rectifier

C. Nica, S. Enache, M. A. Enache

Romania

PSA2-3

213

Time-stepping FEM Based Modeling of a Synchronous Generator connected to infinite bus via a Delta-star Transformer

Luo Ying-li, Zhang Xinli Meng Liang

China

PSA2-4

214

The Analysis and Validation of Saturation Curve Series of Synchronous Generators

Zhang Xinli, Luo Yingli, Liu Xiaofang

China

PSA2-5

217

Half-order modelling of turboalternators - An adapted method of parameter identification

S. Racewicz, D. Riu, N. Retiere, P. Chrzan

Poland

PSA2-6

221

Computation of Forces and Stresses in the Winding Overhang of Large Hydrogenerators at Faulty Conditions

Georg Traxler-Samek, Axel Fuerst, Alexander Schwery and Carlos Ramirez

Switzerland

PSA2-7

229

On the Identification of the Synchronous Machine Parameters Using Standstill DC Decay Test

L. Vicol, M. Tu Xuan, J.-J. Simond, R. Wetter, I.A. Viorel

 

Switzerland

PSA2-8

233

A Comprehensive Algorithm for the estimation of Synchronous Generator Parameters

Elias Kyriakides

Cyprus

PSA2-9

247

Damping Shaft Torsional Oscillation of Synchronous Generator by Fuzzy Logic-Controlled SMES

Mohd. Hasan Ali, Toshiaki Murata, and Junji Tamura

Japan

PSA2-11

293

Special consideration in On-line Partial Discharge (PD) Monitoring for Stator Insulation Condition Assessment of Large Steam-Turbo Generators

E. Sharifi, S. Amini, K. Rahmani

Iran

PSA2-12

294

Stochastic Evaluation of Turbine-Generator Shaft Torsional Torques in a Six-Phase Power System

S.O. Faried and S. Aboreshaid

Canada

PSA2-13

329

Design of A Steam-resistant Insulation System for the Stator of A Low-voltage Turbo-Generator

V. Sihvo, J. Pyrhönen

Finland

PSA2-14

338

Numerical Modelling of Large Solid Pole Synchronous Motors

Ling Luo, Chunting Mi, Haran Karmaker, Peter Zong and George Gao

USA

PSA2-15

372

A Method of Eddy Current Calculation for Stator Core Ends of Turbine Generators

Katsumi Yamazaki, Yuta Watanabe, Hisashi Mogi,Yoichi Mishima, Chikara Kaido, Shinichi Kanao,
Kazuhiko Takahashi, Kazumasa Ide, Kenichi Hattori, Akihito Nakahara and Takashi Watanabe

Japan

PSA2-16

383

The Nonlinear Characteristics of Turbo-generator under Abnormal Operating Conditions

Kang Jinping, Luo Yingli, Wang Jing, Liu Xiaofang, MengLiang

China

PSA2-17

408

Pulsating torques during starting of synchronous motors: Implementation and comparative analysis of different measurement methods

Christer Danielsson, Holger Persson

Sweden

PSA2-18

437

On the Design of a Remote Intelligent Excitation Controller for a Synchronous Generator

Yannis L. Karnavas, Nicolaos P. Polyzos, Demetrios P. Papadopoulos

Greece

PSA2-19

486

The influence of magnetic saturation towards the induced voltage for homopolar synchronous generator

Sorin Deaconu, Lucian Tutelea, Gabriel N. Popa, Iosif Popa

Romania

PSA2-20

492

Analysis of Unbalanced Magnetic Pull in Train-Lighting Brushless Alternators with Skewed Rotor under Static Eccentricity and Conical Rotor Motion

K.P.P. Pillai, Achuthsankar S. Nair, G.R. Bindu

India

PSA2-21

497

Rotor monitoring tool for turbogenerators

E. Guillot

France

PSA2-22

498

Permeance network method coupling with experimental design in order to optimize turbo-alternators

Dmitry Petrichenko, Michel Hecquet, Pascal Brochet, Vyacheslav Kuznetsov, Daniel Laloy

France

PSA2-23

508

Line-Switching Test Based Practical Approach for Identification of Synchronous Machine Parameters

R. Wamkeue, J. Christian, I. Kamwa

Canada

PSA2-24

436

Behavior of Syncronous Generators with Rotor Excentricity Evaluated by the Polarization Fixed Point Method

I.R.Ciric, F.Hantila, M.Maricaru, and S.Marinescu

Romania

PSA2-25

604

Limits of turbine generators underexcited operation

Z. Maljkovic, I. Gašparac, M. Pavlica

Croatia

PSA2-26

639

Surface currents in solid poles of large synchronous machines at direct start

Yujing Liu, Holger Persson

Sweden

PSA2-27

685

Magnetic Unbalance in a Hydrogenerator's rotor and its effects on the Synchronous machine

A. Millan, A. Romero

Venezuela

PSA2-28

687

Steady-State Performance of a Hybrid Excitation Single-Phase Synchronous Generator

Nobuyuki Naoe, Tadashi Fukami, Akiyuki Minamide, Kazuya Takemata

Japan

PSA2-29

691

A BAS application of a Series Magnetized Synchronous Machine

D. Hagstedt, M. Alakula, T. Bergh

Sweden

 

 

15:30-16:40 POSTER (DIALOGUE) SESSION PSA3: INDUCTION MACHINES

Saturday, September 2nd 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PSA3-1

584

Radial forces and torque ripples in split-phase induction motors

Lieven Vandevelde, Claus B. Rasmussen and Jan A. A. Melkebeek

Belgium

PSA3-2

119

A Complete Induction Motor Model for Low and High Frequency Analysis

A. Boglietti, A. Cavagnino

Italy

PSA3-3

202

A New Posibility for the Determination of the Induction Machines Parameters

S. Enache, A. Campeanu, I. Vlad, M. A. Enache

Romania

PSA3-4

203

Influence of Magnetic Saturation on Induction Motor Model Selection

Marko Hinkkanen, Anna-Kaisa Repo, Jorma Luomi

Finland

PSA3-5

246

A Comparison of 3D Models for Determining Skin Effect in Induction Motor End Rings

C. del Perugia, R.D. Findlay, N. Stranges

Canada

PSA3-6

252

The Comparison Study of Different Models Used for Calculation of the Transient Processes of an Induction Motor During Frequency and Soft Starting

Maria Dems, Krzysztof Komeza

Poland

PSA3-7

269

Energy Efficiency of small Induction Machines: Comparison between Motor and Generator Mode

Wim Deprez, Annick Dexters, Johan Driesen, Ronnie Belmans

Belgium

PSA3-8

279

Electromagnetic Excitation Forces in Small Induction Motors

Y. Yoshikuwa, A. Imagi, H. Kometani and J. Okada

Japan

PSA3-9

289

Analysis of Induction Motor Static Eccentricity using Time Stepping Finite Element

M.B.B. Sharifian, J. Faiz, B.M. Ebrahimi

Iran

PSA3-10

298

Using Improved Winding Function Theory and 2D Finite Element Method to Model Air-Gap Eccentricity in Induction Motors

E. Khosrowshahli, E. Sharifi Ghazvini, S. Shamloo

Iran

PSA3-11

326

Detailed Transient Analysis of Self Excited Induction Generator Feeding Induction Motor

Mehmet Akbaba, Amin M. Sultan, Ebrahim Al-Gallaf

Bahrain

PSA3-12

358

Die-cast Copper Rotor Motors via Simple Substitution and Motor Redesign for Copper

R. Kimmich, M. Doppelbauer, D.T. Peters, J.G. Cowie, E.F. Brush

Germany

PSA3-13

365

The complete electrical supply characterization of an induction motor that operates under a given NEMA unbalance

L. F. Mantilla, M. A. Rodríguez

Spain

PSA3-14

384

The Influence of Stochastic Properties on the Motor Parameters of an Induction Machine

C. Bastiaensen, W. Deprez, S. Stevens, J. Driesen

Belgium

PSA3-15

390

Optimization-Based Steady State Analysis of Parallel-Operated Three Phase Induction Generators and Motors

A. I. Alolah and M. A. Alkanhal

Saudi Arabia

PSA3-16

391

Steady-State Analysis of a Mixed Faults Three-phase Squirrel-cage Induction Motor using Time Stepping Finite Element Method

B.M. Ebrahimi, J. Faiz and M.B.B. Sharifian

Iran

PSA3-17

393

FE Torque Analysis of a Shaded-Pole Motor

L. Petkovska, G. Cvetkovski, V. Sarac

FYROM

PSA3-18

453

Stator-Tooth Optimization of an Induction Machine with Squirrel-Cage Rotor

C. Schlensok, S. Felgentrager, D. van Riesen, K. Hameyer

Germany

PSA3-19

458

Behaviour Analysis of Induction Machine Under Broken Bars and Distorted Voltage Input

J. Kappatou, A. Safacas

Greece

PSA3-20

463

Insulation Aging in AC motors due to mechanical stresses

J-Ph. Lecointe, S. Duchesne, R. Romary, J-F. Brudny, P. Schlupp

France

PSA3-21 200 Parallel Scheme for Estimation of Rotor Position and Stator Resistance in Sensorless Speed Control of a Doubly Fed Induction Machine R. Ghosn,  M. Pietrzak-David and B. de Fornel Lebanon

PSA3-22

196

The influence of the frame and windings on the natural frequencies of stator of
induction motors

S. L. Nau, B. C. Bork, H. L. V. dos Santos, N. Sadowski, R. Carlson

Brazil

PSA3-23

140

A solid rotor induction machine for turbo-assist operation

J.R. Bumby, E Spooner and M. Jagiela

UK

 

 

15:30-16:40 POSTER (DIALOGUE) SESSION PSA4: SPECIAL MACHINES

Saturday, September 2nd 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PSA4-1

130

Revisiting the MMF Analysis of Asymmetrical Two-Phase Induction Motors

L. M. de Castro Neto, J. R. Camacho, H. R. de Azevedo, S. C. Guimaraes, C. H. Salerno

Brazil

PSA4-2

169

A New Hybrid Brushless dc Motor without Permanent Magnet

E. Afjei, M.A. Saati, M.M. Nezamabadi, S.Ataei

Iran

PSA4-3

175

Modeling Techniques for Hybrid Excited Doubly Salient Motor with Rotor Skewing

Xiaoyong Zhu, Ming Cheng, Wenguang Li and Wei hua

China

PSA4-4

191

A New Claw Pole Synchronous Machine with DC Excitation in the Stator:a Comparison with the Conventional Claw Pole Alternator

H. Aloui, A. Masmoudi, M. Lecrivain and M. Gabsi

Tunisia

PSA4-5

193

Magnetic Anisotropy considered for Synchronous Claw-Pole Alternators with Axial Flux Component

S. Schulte, F. Henrotte, K. Hameyer

Germany

PSA4-6

207

Model to Evaluate the Influence of the Winding Data on the Brush Wear in Universal Motors

A. Di Gerlando, R. Perini

Italy

PSA4-7

211

Performance of a Dual-Winding Reluctance Generator With Multiple-Barrier Rotor

Tadashi Fukami, Masatoshi Momiyama, Kazuo Shima, Ryoichi Hanaoka, and Shinzo Takata

Japan

PSA4-8

264

Electrostatic Hysteresis Motor

M. Crivii and M. Jufer

Switzerland

PSA4-9

361

Some types of unconventional electromechanical energy converters: application and classification

I. Shvedchikova

Ukraine

PSA4-10

404

2D-FEM Modeling of an Axial-Flux Solid-Rotor Induction Motor

M. Valtonen, A. Parviainen and J. Pyrhönen,

Finland

PSA4-11

412

Clawpole Transverse-Flux Machine with Hybrid Stator

M. R. Dubois, N. Dehlinger, H. Polinder, D. Massicotte

Canada

PSA4-12

421

Light Structures for Low-Speed Multi-Pole Machines for Direct-Drive Applications

P.J.Tavner, E. Spooner

UK

PSA4-13

439

Rotor Design and Performance for a BDFM

P J Tavner, R A McMahon, P Roberts, E Abdi-Jalebi, X Wang, M Jagieła , T Chick

 

UK

PSA4-14

531

Limits and Advantages of Scaling as a Fast Procedure for Designing Transverse Flux Motors

Kang D H, Chang J H, Viorel I -A, Viorel Alina Cristina, Strete Larisa

Korea

PSA4-15

578

Developement of Tubular Type Linear Generator for Free-Piston Engine

Jaewon Lim, Ho-Yong Choi, Sun-Ki Hong, Dong-Hyeok Cho and Hyun-Kyo Jung

Korea

PSA4-16

581

Brushless DC Motor with Frequency Generator Substituted for Position Sensor

Hiro Takano, Mikihiro Kishio, Hideaki Nanko

Japan

PSA4-17

589

Comparative Study on the equivalent circuit of the electric motor and traveling wave piezoelectric ultrasonic motor

Mircea Ignat, George Zarnescu

Romania

PSA4-18

606

High torque motor (vernier reluctance magnet machine) for specific systems

Ph. Enrici, J. Jac, N. Ziegler, D. Matt

France

PSA4-19

647

Performance Comparison of Three and Four-Phase Linear Tubular Stepping Motors

W. Missaoui, L. El Amraoui Ouni, F. Gillon, M. Benrejeb, P. Brochet

France

 

 

15:30-16:40 POSTER (DIALOGUE) SESSION PSA5: SUPERCONDUCTING MACHINES

Saturday, September 2nd 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PSA5-1

348

Development of Synchronous Alternator with HTSC Armature

E.N. Andreev, L.I. Chubraeva, M.V. Manzuk, M.Yu. Platonova, S.S. Timofeyev

Russia

PSA5-2

347

Development of Three-Phase Transformer with HTSC Windings and Amorphous Alloy Cores

E.N. Andreev, L.I. Chubraeva, D.A. Korotkov, M.Yu. Platonova, D.A. Volkov

Russia

PSA5-3

544

Introducing complex engineering approach into curricula by superconductivity

I. Vajda, L. Farkas, S. C. Kashyap, D. K. Pandya

Hungary

PSA5-4

610

Design of permanent motors/generators for energy storage flywheels with Superconducting magnetic bearings

Z.Kohari

Hungary

PSA5-5

633

Nondestructive evaluation of electrical machines using superconductor windings

Raimond Grimberg, Adriana Savin, Rozina Steigmann, Sorin Leitoiu, Alina Bruma

Romania

PSA5-6

744

HTS HIA Generator and Motor for Marine Applications

K. Sivasubramaniam, E.T. Laskaris, M. R. Shah, J. W. Bray, N. R. Garrigan

USA

 

  

 

16:50-18:30 ORAL SESSION OSA1: PERMANENT MAGNET MACHINES

Saturday, September 2nd 2006

Athina1 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OSA1-1

235

Electromagnetic Design Analysis of Tooth Coil, Voltage Regulated, PM Synchronous Generators

A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini

Italy

OSA1-2

156

Maximum Efficiency Operation of Interior Permanent Magnet Synchronous Generator Based on State Space Model

Toshiaki Murata, Kazuhito Nakamura, Junji Tamura and Takeshi Tsuchiya

Japan

OSA1-3

352

Analysis of a High Pole Number Motor with Assymetries Using a Reduced Model

S. J. Salon, O-Mun Kwon, M.V.K. Chari

USA

OSA1-4

426

Unbalanced Magnetic Pull in High-Speed Brushless Permanent Magnet Motors Experimental Observations and Results

U.M. Hoefer, A.G. Jack, B.C. Mecrow

UK

OSA1-5

457

Magnet Loss Analysis of Permanent-Magnet Synchronous Motors with Concentrated Windings

C. Deak, A. Binder, and K. Magyari

Germany

 

 

16:50-18:30 ORAL SESSION OSA2: SYNCHRONOUS MACHINES

Saturday, September 2nd 2006

Athina2 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OSA2-1

216

Study on Frequency Characteristics of Synchronous Generator Damper Circuit

M.Kakiuchi, T.Otaka, S.Nagano, T.Tokumasu, M.Fujita, K.Nagakura, J. Shiina, H.Ito, H.Shimada, D. Hiramatsu, K. Nagasaka

Japan

OSA2-2

287

Connection to Weak Electrical Supply Network of Two Synchronous Machines Operating in Recovery Regime

A. Campeanu, Mihai Radulescu, Marian Badica, Razvan Prejbeanu

Romania

OSA2-3

343

Development of High-Temperature Superconducting Electrical Machines at Siemens AG

Gunar Klaus, Wolfgang Nick, Heinz-Werner Neumüller, Georg Nerowski and William McCown

Germany

OSA2-4

413

Effect of Voltage Swells on the Transient Performance of Saturated Synchronous Motors

Ahmed M. El-Serafi, Narayan C. Kar

Canada

OSA2-5

562

Simplified 3D-effects modeling for low L/D Aspect Synchronous Motors

Di Wu, Haran Karmaker, Peter Zhong, Colin Sun, Hengfeng Chen

 

USA

  

 

16:50-18:30 ORAL SESSION OSA3: INDUCTION MACHINES

Saturday, September 2nd 2006

Athina3 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OSA3-1

345

The Effect of Practical Operating Conditions on the Performance of Induction Machines

Wim Deprez, Cindy Bastiaensen, Stijn Stevens, Ronnie Belmans

Belgium

OSA3-2

367

Cast Copper Induction Motor Inter-bar Resistance Measurements

S. Englebretson, J.L. Kirtley Jr., K. Molina

USA

OSA3-3

518

Induction Machine Analysis for the Diagnosis of Rotor Faults Using the Leakage Magnetic Field

J. Kappatou, C. Marchand, A. Razek

Greece

OSA3-4

614

Estimating circuit models for a deep-bar Induction Motor using the harmonic finite element analysis

A.-K. Repo, A. Niemenmaa, A. Arkkio

Finland

OSA3-5

206

DTC vs. FOC for an induction machine-based flywheel energy storage system associated to a variable-speed wind generator Experimental results

Gabriel Cimuca, Stefan Breban, Mircea M. Radulescu,Christophe Saudemont, Benoît Robyns

Romania

 

 

 

16:50-18:30 ORAL SESSION OSA4: SPECIAL MACHINES

Saturday, September 2nd 2006

Ariadne Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OSA4-1

110

Estimation of the Boundaries for the Claw-pole Geometry in Electrical Water Pump Applications

H. Hembach, D. Gerling, S. Beyer

Germany

OSA4-2

731

An Innovative Axial-Flux Multi-Stack Homopolar SRM

P. Bolognesi, O. Bruno, L. Taponecco

Italy

OSA4-3

323

Numerical Modeling of 3-D Comb Drive Electrostatic Accelerometers Structure - Field And Mechanical Models

S. Wiak, K. Smółka

Poland

OSA4-4

434

Soft Magnetic Composite Axial flux seven-phase machine

F. Locment, E.Semail and F. Piriou

France

OSA4-5

535

Dynamic Characteristics Analysis of 3D Conveyer System Linear Induction Motor for Control Algorithm Developments

Su jin Jeon, Sun bum Kwon, and Jung ho Lee

Korea

 

 

 

20:00-22:00 : Welcome Reception at Minoa Palace Hotel

 


Sunday, September 3rd 2006

 

08:00 : Departure from Minoa Palace Hotel for the One Day Cultural Visit to Knossos Archaelogical Site

 

 

 

Monday, September 4th 2006

 

09:00-10:00 : PLENARY SESSION (Athina1 Room)

 

 

09:00 - 10:00 : Keynote presentation on recent advances on traction motors

 

10:00-10:20 Coffee Break

 

10:20-11:30 POSTER (DIALOGUE) SESSION PMM1: PERMANENT MAGNET MACHINES

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMM1-1

340

Effect of Back-EMF Constraints on Fractional-Slot Surface PM Machines Designed for Wide Constant-Power Speed Range Operation

Ayman M. EL-Refaie, Thomas M. Jahns, John W. McKeever

USA

PMM1-2

351

Torque ripple improvement with IPMSM rotor shape modification

S. Vivier, V. Lanfranchi, G. Friedrich

France

PMM1-3

353

A Backstepping Controller for Sensorless Speed Control of DC Servo Motor Using Adaptive Backstepping Observer

A. Farrokh Payam, B. Mirzaeian Dehkordi

Iran

PMM1-4

363

Torque ripple and cogging torque of surface mounted PM machines with concentrated windings

P. Salminen, H. Jussila, M. Niemelä and J. Pyrhönen

Finland

PMM1-5

368

Harmonic Current Injection Approach To Cogging Torque Suppression In Axial Flux PM Synchronous Machines

J.A. Tapia, D. Soto, A. Valenzuela, R. Wallace

Chili

PMM1-6

369

Experimental Validation of an Axial Flux PM Machine with Field Weakening Capability

J. A. Tapia, D. Gonzalez, R. R. Wallace, M. A. Valenzuela

Chili

PMM1-7

382

An analytical equation for cogging torque calculation in surface mounted permanent magnet motors

K. Y. Lu, P. O. Rasmussen, E. Ritchie

Denmark

PMM1-8

398

Toward Accurate Torque Calculation in Brushless Permanent Magnet and Reluctance Motors

John Simkin, Christopher P. Riley, and Alexandros M. Michaelides

UK

PMM1-9

406

Iron Loss Calculation in a Reciprocating Tubular Permanent Magnet Motor with Soft Magnetic Composite

T. Ibrahim, J. Wang, and D. Howe

UK

PMM1-10

444

Determination of d and q reactances of permanent-magnet synchronous motors using FEM

J. A. Güemes, A. M. Iraolagoitia and P. Fernández

Spain

PMM1-11

455

Design parameters for directly network connected non-salient permanent magnet synchronous generator

J. Kinnunen, J. Pyrhnen, O. Liukkonen, P. Kurronen

Finland

PMM1-12

456

Disk Built-in DC Motor With High Coercive Nd-Fe-B Magnets

M. Zagirnyak, P. Belyi, D. Miljavec

Ukraine

PMM1-13

477

Analytical vs. Numerical calculation of magnetic circuits of PM Machines at no-load and load

A. Rastogi, A. Binder

Germany

PMM1-14

566

Optimization Elements of the PM Excited Transverse Flux Linear Motors

D. H. Kang, P. Curiac and J.H. Chang

Korea

PMM1-15

509

Experimental Tests on a 9-phase Direct Drive PM Axial-Flux Synchronous Generator

D. Vizireanu, X. Kestelyn, S.Brisset, P. Brochet, E.Semail

France

PMM1-16

529

Comparison of non-salient pole permanent magnet motors structures for traction application

J. Figueroa, L.Radaorozandry, J.Cros, P. Viarouge

Canada

PMM1-17

545

Modeling and controlling attractive forces in permanent magnet machines

M. Scuotto, H. Polinder, M. Huizer

Netherlands

PMM1-18

551

Cogging torque elimination in permanent magnet machines

Bernard Laporte

France

 

 

 

10:20-11:30 POSTER (DIALOGUE) SESSION PMM2: DRIVES OF INDUCTION MACHINES

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMM2-1

120

Induction Motor Control using Predictive Algorithm

E.S. de Santana, E. Bim and W.C. do Amaral

Brazil

PMM2-2

133

Closed-Form Analytical Investigation of Electromagnetic Torque-Ripple Components in Induction Motor Drive Fed from PWM VSI with DC-Link Voltage Pulsation

J. Klima

Czech Republic

PMM2-3

172

Robust Sensorless Operation of Vector Controlled AC motors using Extended Kalman Filter trained neural networks

Vedam Subrahmanyam

India

PMM2-4

189

Control Limits of Three Phase AC Controller under Induction Motor Load

A.I. Alolah, R.M. Hamouda and A. Eltamely

Saudi Arabia

PMM2-5

258

Improved Rotor Flux Linkage Oriented Control of an Induction Motor with Included Magnetic Saturation

D. Dolinar, G. Stumberger, P. Ljusev

Slovenia

PMM2-6

322

High Performance Field Oriented Rotor Control of Induction Generators

V. Cecconi, V. Di Dio, A. O. Di Tommaso, D. La Cascia, R. Miceli

Italy

PMM2-7

357

Induction Motor Control using Variable Structure Approach

Amar Golea, Abdelhakim Saiad, Noureddine Golea, Naziha Benounnas

Algeria

PMM2-8

438

Computer investigation of the dynamic behaviour of an asynchronous motor using fuzzy logic for immediate torque control

Z. Koutsogiannis, G. Adamidis, A. Fyntanakis,

Greece

PMM2-9

447

Microscopic Investigation of Energy Conversion in a Squirrel-Cage Induction Motor Drive under Field-Oriented Control

M. Krishnamurthy and B. Fahim

USA

PMM2-10

449

In Wind-Unwind Application the Comparative Realization of Tension Control with Induction Motors Which are Run by Different Controlled Techniques

N. Bekiroglu and E. Aycicek

Turkey

PMM2-11

423

Optimal speed trajectory tracking of an AC motor drive system with simultaneous fuzzy logic minimization of its electromechanical losses

Eleftheria S. Sergaki, George S. Stavrakakis,

Greece

PMM2-12

465

Adaptive Fuzzy Control of Reversible Rectifier Feeding Induction Motor with Improved Power Factor

M.T. Benchouia , M.E.H. Benbouzid, A. Golea, S.E. Zouzou and A. Ghamri

Algeria

PMM2-13

485

Development of a Wavelet theory-based Field-Oriented Control method for small power Electrical Machines

E. Mitronikas

Greece

PMM2-14

488

Robust Parameter Estimation Procedures for Vector Controlled Induction Machine Drives

Carlos H. S. De Vasconcelos, Zelia M. Assis Peixoto

Brazil

PMM2-15

489

Robust Flux Weakening Operation of Induction Motor Drives Based on Stator Flux Vector Control

D.Casadei, G. Serra, A. Tani, L.Zarri

Italy

PMM2-16

496

Inverter Nonlinearities Compensation in a Double Fed Induction Motor Drive close to Synchronous Speed

M.S. Carmeli, F. Castelli Dezza, R. Perini

Italy

PMM2-17

539

Design of a Robust voltage controller for an induction generator in an autonomous power system

Alon Kuperman, Vitaly Spitsa, Raul Rabinovici, Ezra Zeev, George Weiss

Israel

PMM2-18

554

Design of Transient Excitation Sequences for Sensorless Control of AC Machines

Th.M. Wolbank, J.L. Machl

Austria

PMM2-19

588

Vectored Direct Torque Control for Induction Motor under Losses Minimization

Hmidet Ali, Bacha Faouzi, Dhifaoui Rachid

Tunisia

PMM2-20

594

Transient states of polymerizer drive including real load of specially designed induction motor

A. Rusek, A. Popenda

Poland

PMM2-21

662

Modified Field Oriented Control of Induction Machine

Samir Moulahoum, Omar Touhami

Algeria

PMM2-22

736

PWM Waveform impact on Induction Motor Drive Efficiency

Z. Papazacharopoulos, I. Xydis, I. Tsakirakis

Greece

PMM2-23

803

Power factor monitoring of induction machines by using rotor flux oriented vector control

D. Raptis, A. Kladas and J. Tegopoulos

Greece

 

 


10:20-11:30 POSTER (DIALOGUE) SESSION PMM3: DESIGN OF ELECTRIC MACHINES AND TEACHING

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMM3-1

362

Tooth Concentrated Fractional Windings for Low Speed Three Phase a.c. Machines

M. Cistelecan, B. Cosan, M. Popescu

Romania

PMM3-2

385

The Implementation of Computational Fluid Dynamics and Electromagnetic Finite Element Methods as Standard Design Tools for Large Synchronous Generators

B. Streibl, E. Schlemmer, J. Schönauer and F. Ramsauer

Austria

PMM3-3

386

Design of Plastic Bounded Iron Powder Core Motors

A. Reinap, M. Alaküla

Sweden

PMM3-4

464

Optimum designed induction motors with die-cast aluminum and copper cages a comparative study

W. Jazdzynski

Poland

PMM3-5

555

A Rational Way Combining Analytical and Numerical Models with Deterministic Global Optimization Algorithms for the Design of Electrical Machines

J. Fontchastagner, F. Messine, Y. Lefevre

France

PMM3-6

726

Preliminary Design and FEM Analysis of a Rotary-Linear Brushless Machine

P. Bolognesi, L. Taponecco

Italy

PMM3-7

716

On the optimal choice of the end ring resistance for one slot per pole per phase single phase induction motors

M. Poloujadoff

France

PMM3-8

134

Hegels Dialectical Method as a Means for Activating the Students Thinking during Delivering the Lectures on the Transients in Induction Motors

G. Rogozin

Ukraine

PMM3-9

192

Real Time Phasor Diagram of Synchronous Machine as an Educational Tool

D. Makuc, M. Berlec, K. Lenasi

Slovenia

PMM3-10

204

Development of Wind Turbines Prototyping Software Under Matlab/SimulinkThrough Undergraduate Student Projects

M.E.H. Benbouzid, D. Diallo, Y. Amirat, H. Mangel and A. Mamoune

France

PMM3-11

333

Development and implementation of an automated computer aided laboratory exercise integrated in electrical drives courses

I. Tsoumas, A. Safacas

Greece

PMM3-12

450

Free Fall Attraction as a Practical and Theoretical Project in Electrical Engineering Education

F. Carlsson, J. Soulard, H. Grop

Sweden

PMM3-13

514

Teaching numeric modeling and design of electrical devices

A.Reinap

Estonia

PMM3-14

692

Education modernization of Electric Power Engineering Education at Budapest University of Technology and Economics

I. Vajda, S. Halasz

Hungary

PMM3-15

661

Animation Model bank for Electrical Machinery Teaching

Luo Yingli, Chen Xiqiang, Zhang Jianhua, Wang Jing, Wang Hao,
Niu Yinsuo, Ma Bo, Liu Xiaofang, Zhang Deqin

China

PMM3-16

630

Preparation measurements scripts, analysis, selection of measuring apparatus units for education process aims diagnostics of rotary machines on example car alternator

Konrad Skowronek, Artur Wozniak

Poland

PMM3-17

650

Design Considerations for a High Performance Electric Drive for an Unmanned Helicopter Main Rotor

Sam J. Nall and Phil H. Mellor

UK

PMM3-18

171

Skew Effect Parameters of AC Machines with Skewed Slots

Vedam Subrahmanyam

India

  


10:20-11:30 POSTER (DIALOGUE) SESSION PMM4: TESTING, MEASUREMENTS, ACOUSTIC NOISE AND VIBRATION ASPECTS

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMM4-1

105

Digital Calculation of Frequency of Sinusoidal Signal

T. Benslimane

Algeria

PMM4-2

114

A Simplified Online-technique for the Detection of Eccentricity in Induction Motor

Pedro V. Jover Rodriguez, J. A. Antonino, E. Munoz, Antero Arkkio

Finland

PMM4-3

115

Wavelet Analysis for the Detection of Inter-turn Short-circuits and Broken Rotor Bars in Induction Machines

J. A. Antonino, P. Jover, M. Riera, A. Arkkio, J. Roger-Folch

Spain

PMM4-4

157

Development of a Small Spherical AC Servo Motor for Laser Tracker

T. Yano, T.Takatuji, S.Osawa, Y.Motomura, T.Itabe, T.Suzuki

Japan

PMM4-5

220

A new approach for EMI simulation of complex electrical systems

E. Napieralska, D. Roger, K. Komeza

France

PMM4-6

230

Modified Method to Determine Rotor-Bar-Iron Resistance in Three-Phase Copper Squirrel-Cage Induction Motors

Konrad Dabala

Poland

PMM4-7

304

Electromechanical system for static force measurements on keyboard musical instruments

Emmanuel Baudet, Patrick Ragot, Miroslav Markovic and Yves Perriard

Switzerland

PMM4-8

178

Test-Bench for High-Speed High-Power Electrical Drives

Dieter Gerling, Rainer Hildebrand, Harald Hofmann, Kathrin Jungnickel, Benno Lange

Germany

PMM4-9

394

Stator Winding Resistance Measurement of Inverter- Fed Induction Machines

Y. Plotkin, M. Stiebler, M. Centner

Germany

PMM4-10

487

Measurement and detection of Barkhausen Noise: the time-domain approach

B. Guinand, R.Goyet, O. Garrigues

France

PMM4-11

542

A Hybrid Algorithm for the Non Destructive Testing of the Magnetic Materials

A.Nouicer , M.E.H.Latreche and M.Feliachi

Algeria

PMM4-12

154

Vibration Sparking, an unrecognized damage mechanism of High Voltage Windings

Manfred Liese

Germany

PMM4-13

577

Validity of numerical impulse response test in studying unbalanced magnetic pull in electrical machines with parallel stator windings

Andrej Burakov and Antero Arkkio

Finland

PMM4-14

611

On-line monitoring of the induction motor stator windings temperature by using the modulating function approach

A. Balestrino, O. Bruno, A. Landi, L. Sani

Italy

PMM4-15

506

Impedance Vector Monitoring strategy for on-line detection of eccentricity in induction motors

Andreas Stavrou

Greece

PMM4-16

704

An Effective Technique on Extracting Negative Sequence Harmonic Information in Stator Current Based Induction Motor Condition Monitoring

Long Wu, Zhi Gao, Thomas G. Habetler, and Ronald G. Harley

USA

PMM4-18

127

Space Flux Pattern of DC-brushless Motor

F. Ishibashi, T.Takemasa, T.Nishizawa, S.Noda

Japan

PMM4-19

131

Comparison of Vibration Characteristics of 3-phase Permanent Magnet Machines with Concentrated, Distributed and Modular Windings

J. Wang, Z. P. Xia and D. Howe

UK

PMM4-20

144

Acoustic Optimization of a Switched Reluctance Machine using Numerical Simulation

B. Schmulling, K. Kasper, K. Hameyer

Germany

PMM4-21

305

A New Structure for Stator Pole to Reduce Torque Ripple and Acoustic Noise in Switched Reluctance Motor

M. Bahramgiri, M. Besmi, M. Babaei, M. Sahebzamani

Iran

PMM4-22

335

Vibrations optimization of brushless power steering motor with taking into account magnetostriction effects

G. Ombach, J. Junak and A. Ackva

Germany

PMM4-23

359

Noise Reduction using Multi-Phase Windings for Synchronous Machines

S. Schulte, K. Hameyer

Germany

PMM4-24

387

A coupled magnetic, structural and acoustic model of the alternator

M. Furlan, R.Rebec, A. Černigoj, D. Čelič, M. Boltežar

Slovenia

PMM4-25

388

Modeling and verification of magnetic forces in the alternator

A. Černigoj, M. Furlan

Slovenia

PMM4-26

468

Acoustic Measurement for detecting Manufacturing Faults in Electrical Machines

D. van Riesen, C. Schlensok, F. Henrotte, K. Hameyer

Belgium

PMM4-27

601

Permanent magnet synchronous machine simulations to predict vibrations and acoustic noise

S. Bujacz, M. Hecquet, M. Goueygou, P. Brochet, J. Nieznanski

Poland

PMM4-28

694

Vibroacoustic Methods in the Diagnosis of the Electric Machines

Horia Balan, Radu Tirnovan, Aurel Botezan, Antoniu Turcu, Petros Karaissas, Radu Balan

Romania

PMM4-29

712

A fast noise predictive multiphysical model of the PWM-controlled Asynchronous Machine

J. Le Besnerais, A. Fasquelle, M. Hecquet, V. Lanfranchi, P. Brochet,
A. Randria, D. Zorzynski and S. Bujacz

France

PMM4-30

728

Magneto-elastic Coupling model for the study of Vibrations in a Thin Plate

F. Hocini, H. Mohellebi, M. Feliachi

Algeria

PMM4-31

709

An effective test bench for PM synchronous motor characterization

L. Sgarbossa, M. Dai Pre, S. Bolognani

Italy

  

 

 

11:40-13:20 ORAL SESSION OMM1: PERMANENT MAGNET MACHINES

Monday, September 4th 2006

Athina1 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMM1-1

137

Comparative study of 2-phase Flux-Switching and Doubly-Salient Permanent Magnet Brushless Machines

Wei Hua, Ming Cheng, Z.Q. Zhu and D. Howe

China

OMM1-2

467

Cogging Torque Analysis on PMSM Machines by Simulation and Measurement

D. van Riesen, C. Schlensok, B. Schmulling, M. Schoning, K. Hameyer

Germany

OMM1-3

397

A general design strategy for multiphase machine applied to the design of a 7-phase fractional slot concentrated winding PM Machine

F. Scuiller, JF Charpentier, E. Semail, S. Clenet

France

OMM1-4

399

Maximum torque and inductances of surface mounted PM machines

P. Salminen, A. Parviainen, and J. Pyrhönen

Finland

OMM1-5

684

Physical Modeling of PM Synchronous Machine With Short Circuit Winding Faults Based on Circuit-Field Coupled FE Analysis

O. A. Mohammed, S. Liu, and Z. Liu

USA

 

 

 

11:40-13:20 ORAL SESSION OMM2: DRIVES OF INDUCTION MACHINES

Monday, September 4th 2006

Athina2 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMM2-1

100

Stator Winding Design for Multi-Phase Two-Motor Drives with Single VSI Supply

E.Levi, M.Jones, S.N.Vukosavic and H.A.Toliyat

UK

OMM2-2

673

Field Oriented Control of self-excited Induction Generator

A. Bellini, G. Franceschini, E. Lorenzani, C. Iori, C. Tassoni

Italy

OMM2-3

261

Dynamic behaviour of Low Power and Low Cost Induction Machine Drives with Single Shunt

K. Kanelis, W. Zeng

Germany

OMM2-4

371

Operational Behaviour of a Vector Controlled Induction Machine Drive System fed by a Three-Phase Space-Vector Modulated Matrix Converter

P. Potamianos, E. Mitronikas, A. Safacas

Greece

OMM2-5

563

SelfTuning Speed Controller Of Indirect FieldOriented Induction Machine Drives

M. Masiala and A. Knight

Canada

 

 


11:40-13:20 ORAL SESSION OMM3: DESIGN OF ELECTRIC MACHINES

Monday, September 4th 2006

Athina3 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMM3-1

113

Design Studies on Squirrel Cage Induction Motors with Transient Finite Element Calculations and Directly Coupled Circuits

C. Grabner

Germany

OMM3-2

212

Advancements in Electric Machines

Jacek F. Gieras

USA

OMM3-3

265

Optimization of a Toothless BLDC Motor with Faulhaber Winding using a Multiphysic Analytical Model

P. Ragot, M. Markovic, Y. Perriard

Switzerland

OMM3-4

525

Innovating engineering-focused software solution for rotating electrical machines

G. Lacombe, A. Foggia, Y. Maréchal, X. Brunotte

France

OMM3-5

695

Calculation of Stator Slot Harmonic Fields

S. Williamson and Y.N. Feng

UK

 

  

 

11:40-13:20 ORAL SESSION OMM4: TEACHING

Monday, September 4th 2006

Ariadne Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMM4-1

282

A novel Web platform dedicated to teach Power Electronics laboratory exercises

I.C Kobougias, A.C. Nanakos, N.P. Filippas, E.C. Tatakis

Greece

OMM4-2

519

Teaching Electrical Engineering Students in Creative Design

T.Jokinen

Finland

OMM4-3

617

Java applets of electrical machines support laboratory work

M. Centner, R. Hanitsch

Germany

OMM4-4

570

Computational Electromagnetics in the Teaching Environment of an Electrical Machines Laboratory A Small Magnetic Levitator

Paulo G. Pereirinha and Carlos Lemos Antunes

Portugal

OMM4-5

648

Teaching Electric Drives: a Comparison of Basic Modeling and Real Industrial A.C. Drives

A. Molina-Garcia, E. Gomez, J.A. Fuentes and J.A. Villarejo

Spain

 

  

 

13:20-14:30 Lunch at Minoa Palace Restaurant

 

 

14:30-15:40 POSTER (DIALOGUE) SESSION PMA1: PERMANENT MAGNET MACHINES

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMA1-1

572

Development of a shaft-mounted permanent magnet generator for brushless excitation systems of turbo-generators

A. Nakahara, K. Takahashi, A. Semba, F.Goto, K. Hattori, and M.Saeki

Japan

PMA1-2

580

Effect of the Presence of Magnetic Wedges on Saturated Self and Cross-Coupling Inductances of Permanent Magnet Synchronous Motors

R. Lateb, F. Meïbody-Tabar, N. Takorabet, J. Enon, A. Sarribouette, A. Mirzaian

France

PMA1-3

590

Efficiency Comparison of In-wheel PM Motors for Bus Propulsion

M. Andriollo, G. Bettanini, A. Morini, G. Martinelli, A. Tortella

Italy

PMA1-4

591

Study on Optimal Design of Concentrated Winding IPMSM with Wide Speed Range

S. I. Kim, J. H. Bhan, J. P. Hong, K-C Lim

Korea

PMA1-5

609

Comparison of permanent magnet synchronous machines with distributed and concentrated windings

R. Nuscheler

Germany

PMA1-6

615

Steady-State and Transient Performance Analysis for Line-Start Permanent-Magnet Synchronous Motors with Skewed Slots

K. Kurihara, T. Monzen, and M. Hori

Japan

PMA1-7

629

Permanent Magnet 3 MW Low-Speed Generator Development

J. Pyrhönen, P. Kurronen and A. Parviainen

Finland

PMA1-8

683

A Method for Time-Domain Analysis of Permanent-Magnet Brushless Motors Using Permeance Network Approach

L. Ovacik, S. Alkan, B. Kemence

Turkey

PMA1-9

698

Performance Evaluation of PM DC Commutator Motor Based on FE Analysis

G. Cvetkovski and L. Petkovska

FYROM

PMA1-10

725

Vector Control of a Trapezoidal Back-EMF PMSM Machine for High Speed Applications

A. Lidozzi, L. Solero, A. Di Napoli, P. M. Kshirsagar, R. Burgos, D. Boroyevich

Italy

PMA1-11

635

Performance comparison of IPMSM with distributed and concentrated windings

Soon O Kwon, Sung Il Kim, Jung Pyo Hong

Korea

PMA1-12

636

Reduction of the cogging torques of permanent-magnet excited motors with radial flux by the pole-shifting method

Marlene Marinescu, Nicolae Marinescu, Wolfgang Wagner

Germany

PMA1-13

667

Study and Optimisation of an Electrical Generator with Original Structure

M. Benseti, P. Dessante, P. Vidal, J.C. Vannier, C. Marchand

France

PMA1-14

696

Influence of magnetic materials on maximum power limits of permanent magnet synchronous machines

R. Missoum, N. Bernard, M.E Zaim, J. Bonnefous

France

PMA1-15

703

Design Guidelines for the Optimisation of a Switched Permanent Magnet Motor

D. Andessner, W. Amrhein, M. Huber, G. Jungmayr

Austria

PMA1-16

706

Optimal design based on 2D analytical model of axial flux permanent magnet synchronous machine

J. Azzouzi, N. Abdel Karim, G. Barakat, B. Dakyo

France

PMA1-17

740

Permanent Magnet Machines with Concentrated Windings

Ekkehard Bolte, Burghard Kipp

Germany

PMA1-18

735

Integrated Design Process and Experimental Verification of a 50 kW Interior Permanent Magnet Synchronous Machine

M. Aydin, M. K. Guven, Seok-Hee Han and T. M. Jahns

USA

 

 


14:30-15:40 POSTER (DIALOGUE) SESSION PMA2: DRIVES OF VARIABLE RELUCTANCE MACHINES AND PARTICULAR CONTROL TECHNIQUES

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMA2-1

332

Mathematical Modeling and Numerical Simulation of the H2 Robust Controlled Stepping Motor-based Systems

Szász Csaba

Romania

PMA2-2

582

Sensorless Direct Torque Control of Switched Reluctance Motor Using Artificial Neural Networks

Fuat Kucuk Hiroki Goto Hai-Jiao Guo Osamu Ichinokura

Japan

PMA2-3

583

A Novel Position Sensorless Drive of SR Motors Based on Direct Torque Control

M. Mitani, H. Goto, H. J. Guo and O. Ichinokura

Japan

PMA2-4

538

A Real-Time environment for industrial electrical drive control board testing

G. Bucca, F.L. Mapelli,M. Mauri

Italy

PMA2-5

587

A Drive Circuit of Switched Reluctance Motors using Three-phase Power Modules

H. Goto, H. J. Guo, O. Ichinokura

Japan

PMA2-6

116

A New Converter Topology for a Hybrid Brushless dc Motor without Permanent Magnet

E. Afjei, M.A. Saati, M.M. Nezamabadi and S. Ataei

Iran

PMA2-7

201

Wide Speed Control of a Hybrid Excited Synchronous Machine

D. Fodorean, I.-A. Viorel, A. Djerdir, A. Miraoui

France

PMA2-8

330

Human Brain Modeling of Motor Control

Akshay S. Patwal

India

PMA2-9

401

Variable Current Control of A Five Axis Magnetically Levitated Turbomolecular Pump

M. N. Şahinkaya, A. E. Hartavi and R. N. Tuncay

Turkey

PMA2-10

435

A vector controlled axial flux seven-phase machine in default mode

F. Locment, E.Semail and X. Kestelyn

France

PMA2-11

442

Modeling resolvers for their application in high performance drives

J.-Ph. Conard, F. Labrique, P. Sente

Belgium

PMA2-12

443

Influence of the drive system on the performance of a magnetic levitated disk

H. Polinder, C.S.P. Tol, P.M. Overschie, J.W. Spronck

Netherlands

PMA2-13

451

High Torque Drive with Very Small Moment of Inertia

W.-R. Canders, M. R. Rezaei

Germany

PMA2-14

495

Mechatronics traction control design to improve comfort of a tyred electrical tramcar

G. Bucca, F.L. Mapelli, M. Mauri

Italy

PMA2-15

504

An Efficient Kiln Drive System For The Cement Industry

George A. Christopoulos and Athanasios N. Safacas

Greece

PMA2-16

275

An Integrated Drive Circuit for Travelling Wave Ultrasonic Motor

Ch. Patsios, C. Efstathiou, E. C. Tatakis, A. Tzes

Greece

PMA2-17

314

Electrical Drive Assisted Mobility of Paraplegic Patients

Harald Hofmann, Dieter Gerling, Johann Szecsi

Germany

PMA2-18

574

On a Control System Design Using the Partial Model Model Maching of Controlled Processes

F.F.Shoji, N.Takazaki and H.H.Lee

Japan

PMA2-19

729

A Parallel-Connected Vector-Controlled Five-Phase Two-Motor Drive

M.Jones, E.Levi and S.N.Vukosavic

UK

PMA2-21

732

Simulation of common-bus drivers with use of Object Oriented Programming

Krystyna Macek-Kaminska, Marcin Kaminski

Poland

 

 

14:30-15:40 POSTER (DIALOGUE) SESSION PMA3: INDUCTION MACHINES

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMA3-1

507

Artificial Neural Network Based Identification of Nonlinear Model of Induction Machines IS REPLACED BY "Identification of Synchronous Machine Parameters from Saturated Load Rejection Test Records"

R. Wamkeue, F. Baetscher, I. Kamwa

Canada

PMA3-2

512

Thrust ripple reduction of linear induction motor by using additional inductances

T. Utsumi and I. Yamaguchi

Japan

PMA3-3

521

Modeling of Split-Phase Induction Machine using Rotating Field Theory

P. Scavenius Anderson and D. G Dorrell

UK

PMA3-4

523

A Novel Energy Saving Control Method of Motors Used for Multi-mode Gravity load

Cui Xueshen, Luo yingli, Liu xiaofang, Zhang liancheng, Wangyilong

China

PMA3-5

527

Analysis of the three-phase induction motor with spiral sheet rotor

Ramon Mujal-Rosas, Oriol Boix-Aragones

Spain

PMA3-6

532

Characteristics of End-effect Compensator using Magnet Rotator for Linear Induction Motor

N. Fujii, T. Yoshihara and K. Sakata

Japan

PMA3-7

549

Three-Phase Induction Motor Simulation Model Based on a Multifrequency Per-Phase Equivalent Circuit Considering Stator-Winding MMF Spatial Harmonics and Thermal Parameters

F. J. T. E. Ferreira, A. T. de Almeida, and G. Baoming

Portugal

PMA3-8

550

Considerations on the Custom Design of the Stator-Winding of Low-Voltage, Three-Phase, Cage Induction Motors to Improve their Efficiency and Reliability

F. J. T. E. Ferreira and A. T. de Almeida

Portugal

PMA3-9

552

Torsional Dynamics of Generator-Units During The Start-up of The Induction Motor

M. Mirosevic, Z. Maljkovic, M. Milkovic

Croatia

PMA3-10

565

Notes About Inductances Calculation of Induction Motor Under Radial And Axial Air-gap Eccentricity

A. Ghoggal , S.E. Zouzou

Algeria

PMA3-11

586

Improving Three-Phase Induction Motor Efficiency by the Optimized Design With Copper Rotor Cage

P-W. Han, Y-D.Chun, D-H. Koo

Korea

PMA3-12

618

Finite Element techniques enhancing the traditional analytical induction motor design procedure

M. Centner, R. Hanitsch

Germany

PMA3-13

620

Study on the Bearing Currents Activity in Cage Induction Motors using Finite-Element Method

F. J. T. E. Ferreira , P. Pereirinha and A. T de Almeida

Portugal

PMA3-14

627

Modelling of a Squirrel-cage Linear Induction Motor by Space Harmonics

Ana Julia Escalada, Javier Poza, Sergio Luri, Antonio González

Spain

PMA3-15

631

Reduction of Harmincs of Single Phase Induction Motors with a Small Power Range by Specified Design Steps

J. P. Bacher

Austria

PMA3-16

672

Frequential modelling of induction machine in view of phase currents simulation

M. Belhaj, P. Guérin, M.E. Zaim

France

PMA3-17

677

Analysis of rotor slot harmonics rotation in squirrel cage induction machines

M.Y. Kaikaa, A. Khezzar, M. Boucherma and M.E.K. Oumaamar

Algeria

PMA3-18

678

An Analytical Analysis for Self-Excited Induction Generator

L. Louze, A. Khezzar and M. Boucherma

Algeria

PMA3-19

717

Full-Load and Half-Load Efficiency as Characteristics of Energy Efficiency Induction Motors at all Loads

M. Kostic

Serbia

 

 


14:30-15:40 POSTER (DIALOGUE) SESSION PMA4: DC MACHINES AND ACTUATORS

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMA4-1

231

Study of dynamic regimes at direct current motors by numerical methods

I. Vlad, A. Campeanu, S. Enache

Romania

PMA4-2

602

Estimation of the electrical and mechanical parameters of a permanent magnet dc motor model taking into account the oscillations of the induced voltage

Roland R. Seebacher, Guenther Dannerer, Klaus Krischan, Georg Ofner

Austria

PMA4-3

656

Spectral Analysis of Signals of Commutator DC Motor

Z. Głowacz and A. Zdrojewski

Poland

PMA4-4

272

Computer Simulation of Actuators Working on Principle of Thermoelasticity

M. Pantelyat, Y. Matyukhin, P. Gontarowskiy, I. Doležel, P. Karban, B. Ulrych

Czech Republic

PMA4-5

402

PM Tube machine designed for a controlled vehicle shock-absorber suited for energy recuperative operation

Istvan Zador - Bence Falvy - Istvan Vajda

Hungary

PMA4-6

416

StackedType Electrostatic Actuator with Squared Thick Electrodes

Kazuo Okuda, Yoshiyuki Hata and Keiji Saneyoshi

Japan

PMA4-8

480

Two cogging force minimization applied to a linear actuator

G.Krebs, A.Tounzi, B.Pauwels, D.Willemot, F.Piriou

France

PMA4-9

490

Integrated Electromagnetic-Thermal-Mechanical Design of Tubular Permanent Magnet Actuators

D.Casadei, F. Milanesi, G. Serra, A. Tani, L.Zarri

Italy

PMA4-10

522

Electromagnetic Valve Controlled Internal Combustion Engines: a Comparison Between Two Major Topologies

H. Aloui, M. Gabsi,H. Ben Ahmed and M. Lecrivain

France

PMA4-11

612

Smart BLDC actuator with an integrated mechanical clutch

J. Tbatou, D. Prudham, L. Billet

France

PMA4-12

641

A multi-air-gaps linear electric actuator design using finite elements methods

N. Ziegler, D.Matt, J.Jac ,P. Enrici

France

PMA4-13

642

Selection of the Soft Magnetic Materials for a High Precision Positioning System Design

A. Lebedev, E. Lomonova, D. Laro, A. Vandenput

Netherlands

PMA4-14

645

Passive and Active Constant Force-Displacement Characteristics of a Long-Stroke Linear Actuator

L. Encica, J. Paulides, E. Lomonova, A. Vandenpu

Netherlands

PMA4-15

697

Design and optimization of a clutch magnet actuator

V. Pauvert, N. Bernard, M.E. Zam, J. Bonnefous

France

PMA4-16

658

Torque Analysis of Various Microshutter Actuators Using Virtual Work Principle

Hong-Joo Lee, Sang-Moon Hwang and Tae-Soon Kim

Korea

PMA4-17

659

Development of microspeaker with a linear air gap in mobile phones

Sang-Moon Hwang , Joong-Hak Kwon and Yong-Chang Yang

Korea

 

 

 

14:30-15:40 POSTER (DIALOGUE) SESSION PMA5: MATERIALS AND LOSSES

Monday, September 4th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PMA5-1

378

Adjustable-Angle Triangular Lossy DNG Slabs with Enhanced Focusing Capabilities

D. L. Sounas, N. V. Kantartzis, and T. D. Tsiboukis

Greece

PMA5-2

411

Effect of Machining on the Properties of Resin-Based Soft Magnetic Composites

M. R. Dubois, P. Lemieux, C. Cyr, D. Massicotte

Canada

PMA5-3

417

Eddy Current Losses and Demagnetization in Permanent Magnets

C. da Silva, Z. Makni, M. Besbes, C. Marchand, Adel Razek and Renato Carlson

Brazil

PMA5-4

730

Optimization Material Distribution in Ferromagnetic Electromagnet

P. Boissoles, H. Ben Ahmed, M. Pierre, B. Multon

France

PMA5-5

741

Variation of Magnetic Flux Density with Distance from the Cut Edge of Grain Oriented Electrical Steel

G. Loizos, A. J. Moses

Greece

PMA5-6

334

Investigation of thermal ageing process of NdFeB magnets

Istvan Meszaros

Hungary

PMA5-7

259

Interlaminar Losses Evaluation in Electrical Machines Stators

E. J. Meurer, N. J. Batistela, R. Carlson, N. Sadowski, L. Von Dokonal, A. A. de Espindola

Brazil

PMA5-8

270

Additional Eddy Current Losses in the Stator Clamping System of Large Hydro Generators caused by the Third Harmonic of the Airgap Field

Erich Schmidt, Georg Traxler-Samek, Alexander Schwery

Austria

PMA5-9

297

Calculation of losses in retaining sleeves of high speed permanent magnet brushless machines: simple analytical approach versus finite element method

Dan M. Saban, Jacek F. Gieras, and Thomas A. Lipo

USA

PMA5-10

302

Influence of Perpendicular Flux in Laminated Core and Core Losses

H. Mogi, C. Kaido, S. Kanao, Y.Mishima, K. Yamazaki, Y. Watanabe A. Nakahara, K. Takahashi, K. Ide, K. Hattori, and T. Watanabe

Japan

PMA5-11

500

Iron losses distribution in a railway traction induction motor

A. Fasquelle, A. Ansel, S. Brisset, M. Hecquet, P. Brochet, A. Randria

France

PMA5-12

548

Circulating Currents in the Parallel Stator Conductors of Electrical Machines

M. J. Islam, A. Arkkio

Finland

PMA5-13

556

Modeling the eddy currents in conducting sleeves by an analytical field calculation method

M. Leroy, C. Henaux , B. Nogarede

France

PMA5-14

569

Polarization Effect on Iron Losses in Induction Motors

L. T. Ergene, S. J. Salon, R.C. Degeneff,

Turkey

PMA5-15

623

Influence of the values of the coefficients in Bertottis statistical expression on the loss figure computation in induction motors

P. Arboleya, G. Díaz, C. González-Morán, J. Gómez-Aleixandre

Spain

 

 

 

15:40-16:00 Coffee Break

 

 

16:00-17:40 ORAL SESSION OMA1: MONITORING AND DIAGNOSTICS

Monday, September 4th 2006

Athina1 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMA1-1

671

Accurate Monitoring of Rotor Modulating Signals for Doubly-Fed Induction Machines in Wind Generation Systems

A.Yazidi, G.A. Capolino, H. Henao, A. Bellini, F. Filippetti, C. Rossi, A. Stefani, D. Casadei

France

OMA1-2

553

New multipole decomposition method for the measured magnetic signal

O-Mun Kwon, Sheppard J. Salon, M.V.K. Chari, and Jerry P. Selvaggi

USA

OMA1-3

253

Multi-Slice FE Modelling of Induction Motors havinga Broken BarInfluence of Inter-Bar Currents and Bar Breakage Location

J. Gyselinck J. Sprooten and X.M. Lopez-Fernandez

Belgium

OMA1-4

478

Test bed for virtual inertia variation to induction machines diagnostic aims

A. Bellini, C. Concari, G. Franceschini, E. Lorenzani, C. Tassoni, A. Toscani

Italy

OMA1-5

655

Fault detection in the subsynchronous cascade drive via time and frequency analysis of the rotor current space vector

I. Tsoumas, A. Safacas

Greece

 

 


16:00-17:40 ORAL SESSION OMA2: DRIVES OF VARIABLE RELUCTANCE MACHINES

Monday, September 4th 2006

Athina2 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMA2-1

161

Calculation of the Optimal Fire Angles in Single-Pulse Controlled Switched Reluctance Generator Drives

Christos Mademlis and Iordanis Kioskeridis

Greece

OMA2-2

167

Evaluation of Switched Reluctance Motor Drives for Wide Speed Range Drive Applications

Cuneyt Karacan, H. Bülent Ertan

Turkey

OMA2-3

493

A Novel Suggestion of High Efficency Servo Drive Method for The Stepping Motor By The Sensorless Control

M. Yoneda , H.Dohmeki

Japan

OMA2-4

541

Sensorless Vector Control Parameters Estimation of Synchronous Reluctance Motor Using a Coupled FEM & Preisach Model

Hong Seok Kim, Jung Ho Lee and Jang-Sung Chun

Korea

OMA2-5

743

Speed Control of Axial Laminations Switched Reluctance Motor Provided with Digital Pole Placement Controller

H.M.Hasanien, N.H. Saad, M.A. Mostfa and M.A.Badr

Egypt

 

  

 

16:00-17:40 ORAL SESSION OMA3: ELECTRIC VEHICLES AND POWER ELECTRONICS

Monday, September 4th 2006

Athina3 Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMA3-1

273

Traction Drive Technology at Voith - Design Aspects and Solutions

Andreas Lange

Germany

OMA3-2

592

Development of Multi-layer Buried Permanent Magnet Synchronous Machine for Vehicle Application

Sang-Yeop Kwak, Jae-Kwang Kim, Sang-Yong Jung, Cheol-Gyun Lee and Hyun-Kyo Jung

Korea

OMA3-3

613

Global Optimal Design of a Traction Motor by a Systemic Approach of the Electric Drive Train

V. Mester, F. Gillon and P. Brochet

France

OMA3-4

355

A Three-Level Shunt Active Power Filter Controlled with the Space Vector Pulse Width Modulation

H. Djeghloud, H. Benalla

Algeria

OMA3-5

670

Analysis and Minimization of Output Current Ripple of Five Phase PWM Inverters

Pekik Argo Dahono

Indonesia

 

  


16:00-17:40 ORAL SESSION OMA4: DC MACHINES AND ACTUATORS

Monday, September 4th 2006

Ariadne Room

 

 

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

OMA4-1

528

Brush DC motor simulation with Cassie arc model

J. Cros, N. Fontaines, V. Masson, J. Jeuvrey, M. Frenette, J. Figueroa, P. Viarouge

Canada

OMA4-2

405

Development of Fish Robot Using Stacked-type Electrostatic Actuators

Y.Hata, K.Saneyoshi, K. Okuda

Japan

OMA4-3

471

From Electromagnetic Modeling to Life Cycle Assessment: A Complete Framework for Actuator Designing

D. Ladas and V. Mazauric

France

OMA4-4

632

Optimal Design of a Linear Permanent Magnet Actuator for Active Roll Control in Automotive Applications

L. Encica, J. Paulides, E. Lomonova, A. Vandenput

Netherlands

OMA4-5

646

A Power Line Communication Approach for Automotive Electromechanical Actuators

E. Arabia, A. Consoli, C. Ciofi, R. Merlino, A. Testa

Italy

 

 

 

 

19:30 Departure from Minoa Palace Hotel for the Official Dinner

 

 

 

Tuesday, September 5th 2006

 

09:00-10:00 : PLENARY SESSION (Athina1 Room)

 

 

09:00 - 10:00 : Keynote presentation on recent advances on generators for wind-turbines

 

10:00-10:20 Coffee Break

 

10:20-11:30 POSTER (DIALOGUE) SESSION PTM1: POWER GENERATION BY RENEWABLE SOURCES

Tuesday, September 5th 2006

 

 

No

 

Ref

 

Paper title

 

Authors

Country of the

corresponding author

PTM1-1

164

An electrical machine approach to power flow control in power systems with wind integrations

Marta Molinas, Tore Undeland

Norway

PTM1-2

168

A Stochastic Model for Isolated Eolian Installations

J. Fouladgar

France

PTM1-3

173

Design Aspects and Performance Simulations of Wind Turbine Generators

X. Feng, G. Rupertus, H. Chen, W. Chung

USA

PTM1-4

198

Application of Fuzzy Logic Control based Statcom to stabilize Wind Turbine Generator System

S.M. Muyeen, Mohammad Abdul Mannan, Mohammad Hasan Ali, Rion Takahashi, Toshiaki Murata and Junji Tamura

Japan

PTM1-5

227

Integration of Wind Energy in Competitive Electricity Markets

S. N. Singh and Demetrios P. Papadopoulos

India

PTM1-6

242

Steady State Equivalent Model of PM Generators Feeding Capacitor Loaded Diode Bridges, for Wind Energy Generation

A. Di Gerlando, G. M. Foglia, R. Perini, M. Ubaldini

Italy

PTM1-7

243

The State of the Art of Generators for Wind Energy Conversion Systems

Y. Amirat, M.E.H. Benbouzid, B. Bensaker, R. Wamkeue and H. Mangel

France

PTM1-8

248

Wind Generator Stabilization by PWM Voltage Source Converter and Chopper controlled SMES

Mohd. Hasan Ali, Toshiaki Murata, and Junji Tamura

Japan

PTM1-9

316

A Study of Cooperative Operation of Flywheel Generator and Hydrogen Electrolyzer with Wind Generator

Masaaki Nobuta, Rion Takahashi, Toshiaki Murata, Junji Tamura

Japan

PTM1-10

317

Fundamental Research of Hydrogen Production System Using Variable Speed Wind Generator

Hideyuki Nakabayashi, Rion Takahashi, Toshiaki Murata, Junji Tamura, Motoo Futami, Masaya Ichinose, Kazumasa Ide, Kazumi Fujii, Takeyuki Itabashi

Japan

PTM1-11

328

Dynamic Contribution Of DFIG Based Wind Plants To System Frequency Disturbances

M. Kayıkçı, J.V. Milanović

UK

PTM1-12

349

Smoothing of the wind power production by a geographical spreading of the wind farm: application to asynchronous doubly-fed wind generators

F. Vallée, J. Lobry and O. Deblecker

Belgium

PTM1-13

396

Sources of harmonics in wind farms

Y. Plotkin, D. Schulz, K. Hueneke, R. Hanitsch

Germany

PTM1-14

366

Simulation Analysis of 2 MW Doubly Fed Induction Generator Wind Turbine with Active Crowbar under Network Disturbance

S. Seman, J. Niiranen, and A. Arkkio

Finland

PTM1-15

375

A Grid-connected Photovolatic System using Current-Source Inverter

Joung-Min Lim, Sang-Hun Lee, Sung-Jun Park, Chae-Joo Moon, Man-Hyung Lee

Korea

PTM1-16

403

Influence of distributed generators on the harmonic level of a 20 kV distribution network

A. Dagoumas, A. Marinopoulos, F. Kinis, C. Demoulias, P. Dokopoulos

Greece

PTM1-17

448

Impacts of Distributed Generators on the Inrush Transient of Distribution Power Transformers

Navid Taghizadegan, M.B.B. Sharifian, A. Yazdanpanah Ghoharrizy

Iran

PTM1-18

649

Optimal Matching Between a Permanent Magnet Synchronous Machine and a Wind Turbine Statistical Approach

D. Morales, M. López, J-C. Vannier

France

PTM1-19

723

Robust Nonlinear Control for Vibration Attenuation in Variable Speed Wind Turbines

A. G. Soldatos, S. A. Papathanassiou, M. P. Papadopoulos and A. G. Kladas

Greece

PTM1-20

737

Simple control schemes for grid-connected three-phase voltage-source inverters of DG units

F. Gakis, S.Papathanassiou

Greece

 


10:20-11:30 POSTER (DIALOGUE) SESSION PTM2: DRIVES OF SYNCHRONOUS, PM AND DC MACHINES

Tuesday, September 5th 2006